Midwest 50/30/20 amp Unmetered surface box U075CTL010 – Loop Lug
$420.00 $209.99
Cross Reference: TL137US, CESMPSC75GRHR, GE1LU532SS
Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.
- Description
- Discussion (73)
- Specifications
Description
Product Description
This 50/30/20 RV outlet is a popular choice for residential or RV parks. Constructed of G90 galvanized steel, this 50/30/20 Midwest post-mount surface mount RV box is finished with a gray polyester powder-coated paint that is baked on and NEMA 3R rated for outdoor use. The rolled-edge receptacle door swings up and open and can be locked. Units come factory wired and are assembled with breakers and receptacles installed and has loop-fed lugs. Approved for use in USA & Canada.
Features:
- All in one construction for factory assured terminations
- Rolled edge door for cord protection
- Heavy 16 ga galvanized zinc coated steel with highest quality electro deposition finish resists corrosion and fading
- Welded flange, NEMA 3R construction for lasting service in outdoor installations
- All components are factory wired and assembled, reducing installation time
- Door holds in open position for user convenience
- All terminals accept copper or aluminum wire for added installation flexibility
- Wide range of receptacle configurations
- Broad range of concentric knockouts to accommodate wiring needs
- All units with 12 to 2 copper/aluminum equipment ground lug
- Factory wired from loop feed lugs, located in the post to receptacles, reducing installation time
- Loop feed lugs have twin 2 to 250 MCM terminals minimum per phase, copper/aluminum (some models available up to 350 MCM)
- Rolled edge post bottoms to protect service cable
- Post door removable for installation ease
- Surface heads
- Hub provision
- LC55N1T load center
- Suitable for service equipment
- Twin lugs per phase (loop feed for surface mount units) post options
- GFCI duplex receptacle options
Technical Description:
Unmetered Type; G90 Steel Material; Zinc Coated Finish; 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Line), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Aluminum, Line), 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Load), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Copper, Neutral-Large Hole), 10 to 8 AWG Solid, 10 to 1/0 AWG Stranded (Aluminum, Neutral-Large Hole), 14 to 8 AWG Solid, 14 to 4 AWG Stranded (Copper, Neutral-Small Hole), 12 to 8 AWG Solid, 12 to 4 AWG Stranded (Aluminum, Neutral-Small Hole), 12 to 8 AWG Solid, 12 to 2 AWG Stranded (Copper/Aluminum, Ground) Wire Size; UL, CUL Approval; NEMA 3R Enclosure; 100 Amp Current Rating; 1-Phase Circuit Configuration; No Illuminated; CB250 First Position Circuit Breaker Type; BR54U Left Position Receptacle Type; CB120 Third Position Circuit Breaker Type; CB130 Second Position Circuit Breaker Type; 5-20R2GFCI Right Position Receptacle Type; R32U Center Position Receptacle Type; Voltage Rating 120/240 Volt; Cabinet Dimension 9-3/4 Inch Width X 5-3/16 Inch Depth X 17-3/8 Inch Height; Mounting Type Surface;
Product Specifications
| |
---|---|
UPC: | 784567571820 |
Second Position Circuit Breaker Type: | CB130 |
Third Position Circuit Breaker Type: | CB120 |
Wire Size: | 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Line), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Aluminum, Line), 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Load), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Copper, Neutral-Large Hole), 10 to 8 |
Illuminated: | No |
Material | G90 Steel |
Finish: | Zinc Coated |
Enclosure: | NEMA 3R |
Approval: | UL, CUL |
Additional Information: | Voltage Rating 120/240 Volt; Cabinet Dimension 9-3/4 Inch Width x 5-3/16 Inch Depth x 17-3/8 Inch Height; Mounting Type Surface; Applicable Standard NEMA, NEC |
Type: | Unmetered |
| |
---|---|
Current Rating: | 100 Amp |
Circuit Configuration: | 1-Phase |
Left Position Receptacle Type: | BR54U |
Center Position Receptacle Type: | R32U |
Right Position Receptacle Type: | No |
Right Position Receptacle Type: | G90 Steel |
Category: | Zinc Coated |
Manufacturer: | Midwest Electric Products, Inc. |
Manufacturer Part Number: | U075CTL010 |
Product Description: | UL, CUL |
Cross Reference: | GE1LU532SS, CESMPSC75GRHR, TL137US |
| |
---|---|
UPC: | 784567571820 |
Second Position Circuit Breaker Type: | CB130 |
Third Position Circuit Breaker Type: | CB120 |
Wire Size: | 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Line), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Aluminum, Line), 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Load), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Copper, Neutral-Large Hole), 10 to 8 |
Illuminated: | No |
Material | G90 Steel |
Finish: | Zinc Coated |
Enclosure: | NEMA 3R |
Approval: | UL, CUL |
Additional Information: | Voltage Rating 120/240 Volt; Cabinet Dimension 9-3/4 Inch Width x 5-3/16 Inch Depth x 17-3/8 Inch Height; Mounting Type Surface; Applicable Standard NEMA, NEC |
Type: | Unmetered |
| |
---|---|
Current Rating: | 100 Amp |
Circuit Configuration: | 1-Phase |
Left Position Receptacle Type: | BR54U |
Center Position Receptacle Type: | R32U |
Right Position Receptacle Type: | No |
Right Position Receptacle Type: | G90 Steel |
Category: | Zinc Coated |
Manufacturer: | Midwest Electric Products, Inc. |
Manufacturer Part Number: | U075CTL010 |
Product Description: | UL, CUL |
Cross Reference: | GE1LU532SS, CESMPSC75GRHR, TL137US |
Daniel Ujvari –
This is a high-quality RV Power Outlet. The box is built robustly and looks like it will take quite a bit of abuse. I’m very happy with it. I could do without their advertising on the outside, but I’ll forgive them since they provided such a good product at a fair price.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
DDAILY –
Very high quality panel. It was a breeze to install and use. I feel very safe having this product as our campers connection at our camp site.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Ronald Spencer –
Thank you
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Pat’s Precision Auto & Diesel –
This is a great box. They are expensive so it is important to get a nice one. We are hooked up to our live-in 5th wheel. I swapped out one of the receptacles to have exactly what I needed, but it has been a great box so far
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
michael simpson –
Perfect for setting up your camper with outside the house
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Krissa S. –
A very nice unit that works fantastic. The door will close even with a plug with molded handle in a socket for a water resistantConnection. It was easy to install and made from quality components. I would recommend it to anyone that needs an rv powerStation.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Tim Franklin –
I installed this sub-panel in my garage to provide power for multiple devices . . . 220V 4 Post Garage Lift, EVSE Electric Vehicle Charger, a Welder, and Travel Trailer. The combination of plugs and voltages makes this a great all-purpose box. I particularly like the fact that the door opens to the side so that you don’t have to duck to see the plugs.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Susan K. –
Arrived quickly, works great. No issues
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Campground Pete –
This was perfect for my RV hook up. It was a 50 amp 240 volt and I converted it to 30 amp 120 volt. Works perfect. I have used these on 3 other occasions for the same purpose. You can’t beat them. You have a means for disconnect and Nema 3r protection.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Amazon Customer –
What it was designed for.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
spike56 –
Looks well built sturdy. I have not installed it yet as I am not that far along in our project. Can’t wait.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
AJ Prestley –
Great value..
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
QTRV Park –
This unit is greatly improved over the previous model purchased. This unit seems to be well built and even has a new lid that allows you to close the cover while power cables are connected which previous model did not provide. Downfall is the cheap aluminum hinges which will break off if you are not careful. All in all it is not bad for the price.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Steven Grosse –
Good right in with the rest of the boxes on the house.Easy to write up.Mine was set up for a camper. It’s a simple thing to set up for a hot tub. Word are a little different in the source/Mason panel box.Works great. Heavy downpour and not a drop inside.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Terry Arnold –
I liked it
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
BoBo –
I liked the fact that this box had a knockout plug on the back. Since mine was a wall mount application, the rear knockout was perfect!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
M. Simpson –
This is a very well made box. I would not consider any RV box that doesn’t have the breakers. They should be shut off before unplugging.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Marleina Thomp –
prompt shipping, fair price
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
charles orwig –
This is a well built device and easy to install by an experienced contractor. I would buy it again
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Big T –
have had it installed for over a year evertthing still 100%
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Rich –
I purchased this box to mount outside so we could plug our camper in when it’s in the driveway. This is an excellent box and it came with all internal componentS pre-wired. Once it was mounted, we ran power to it, then checked the connections using our surge protector. Once the lights on the protector confirmed all was correct, we plugged the camper in and successfully checked to make sure the A/C worked properly. It will be so nice during the summers to come to work comfortably in the camper. I highly recommend this product.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
RVGuy –
Nice cabinet with 2 circuits one 50 amp and one 20 amp. Good weather resistant cover.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Audie –
Very sturdy and well designed.. made supplying electricity to my rv easy
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Ron –
no brainer hookup any DIY guy can hook this up
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
schmalfeldt –
Just what we were looking for, installed with ease. No problems. Love the new style door.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Scott L. Henderson –
Great product
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Richard –
Very good quality. Just as advertised
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jeff Everett –
I do recommend this. Seems to be high quality, the extended lid works well for large RV plugs with a handle. It is made so that cover will close with any of the three receptacles used. Only negatives are minor, latch is not quite up to par, may be better with a little adjustment/bending. I wish hole knockouts were punched a little deeper, they are very difficult to break out, but this is a common problem with many electrical devices.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
scott –
Very high qualityArrived one day early
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jan Olthuis –
Was exactly what we needed. Has a solid, weather resistant finish. Solid construction.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Valley Oaks –
Nice enclosure to install for RV or Trailer at home. Set up small site for parents to come by, I have an additional one set up where I store my trailer in side yard.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Sullivan –
Easy install. Works great!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
miles h. –
This is a perfect solution to hook up your rv at your home to keep extra space for family or friends to stay!!!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Customer X –
Outlet quality could be better
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jeff l –
The cover is hinged from the top which helps keep the electrical cords and plug-ins dry. I recommend this box over others I have used in the past.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
goneracin –
just what i needed
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Tabitha –
Very well built st a decent price used for my RV parking spot
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Maicoman –
Exactly as described. I wanted something to put on the side of my cabin at the lake for when large groups come up and want to plug in their Trailers or RV. This is exactly what I needed with a 50 Amp. a 30 Amp and Two standard 120VAC protected outlets all in one box with minimal wiring to get it installed.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Lance –
Very good box! Simple and easy to wire up. Great for my 50 amp camper.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
S. Mizell –
DELIVERY CAME DAYS AHEAD OF SCHEDULE. BOXES WERE PERFECT CONDITION. NO DENTS OR DINGS. I’M VERY HAPPY.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Frank Stoltz Jr –
We used it as a subpanel for our EV car charger. Works great.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
DR –
I am very happy with this product.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Nicolas M. –
great product!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
shawn hansen –
Works great so far. I didn’t want to risk not getting it right.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Laurence Stahl –
Great
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Customer –
Performs exactly as it should. I’m quite satisfied with the product.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Sog4321 –
I am very happy with this purchase. The box is made of good quality materials and VERY easy to install. The directions are on the inside of the lid. Depending on how long the run is, you’ll need thick wire. I used 6 gauge for a little less than 50 ft. The box requires a 4 wire hookup (black, red, white, green and a bare ground cable). So all you have to do on the box side is hook up to the terminals based on the wiring diagram and it’ll be up and running in no time.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
DK –
Worked out perfectly for home rv power setup.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
charles –
good quality product feel comfortable that it will last a long time and not short out in weather
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
campNcrawlR –
Great product. Had my electrician install it and it’s exactly what I’d hoped for.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
David H. Davis –
Worked great just what I needed a a fair price. Dhd
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Teresa Bo –
I bought an electric vehicle and needed L2 charging. I replaced an existing L6-20 receptacle for plugging in a portable emergency generator with this. It gives me the NEMA 14-50 I needed for the car plus a 110 outlet for my snow thrower’s electric start and I can still use it to plug in an emergency generator. Good price – competitive with local home improvement stores and much cheaper than commercial suppliers. One quarter the price of a Tesla wall charger.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Willie Ayers –
This is my second electric box that I have ordered for my RV. This one is nearly identical as my first one except for the raised area on the door to allow room for the power cord plugs. This is far superior to the other one and easy to install and wire.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Joseph LeRouge –
I have a deer private deer camp site with One 50 amp circuit but I needed 50 30 and 120 amps plugs. This circuit box solve all my problem and insured complete safety with deticated cuicuit. The price was well worth the value. Joe
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
scott walker –
Works great,well made.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Robert –
This work out great very easy to hook up
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal