Midwest 50/30/20 amp Unmetered surface box U075CTL010 – Loop Lug
$420.00 $209.99
Cross Reference: TL137US, CESMPSC75GRHR, GE1LU532SS
Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.
- Description
- Discussion (73)
- Specifications
Description
Product Description
This 50/30/20 RV outlet is a popular choice for residential or RV parks. Constructed of G90 galvanized steel, this 50/30/20 Midwest post-mount surface mount RV box is finished with a gray polyester powder-coated paint that is baked on and NEMA 3R rated for outdoor use. The rolled-edge receptacle door swings up and open and can be locked. Units come factory wired and are assembled with breakers and receptacles installed and has loop-fed lugs. Approved for use in USA & Canada.
Features:
- All in one construction for factory assured terminations
- Rolled edge door for cord protection
- Heavy 16 ga galvanized zinc coated steel with highest quality electro deposition finish resists corrosion and fading
- Welded flange, NEMA 3R construction for lasting service in outdoor installations
- All components are factory wired and assembled, reducing installation time
- Door holds in open position for user convenience
- All terminals accept copper or aluminum wire for added installation flexibility
- Wide range of receptacle configurations
- Broad range of concentric knockouts to accommodate wiring needs
- All units with 12 to 2 copper/aluminum equipment ground lug
- Factory wired from loop feed lugs, located in the post to receptacles, reducing installation time
- Loop feed lugs have twin 2 to 250 MCM terminals minimum per phase, copper/aluminum (some models available up to 350 MCM)
- Rolled edge post bottoms to protect service cable
- Post door removable for installation ease
- Surface heads
- Hub provision
- LC55N1T load center
- Suitable for service equipment
- Twin lugs per phase (loop feed for surface mount units) post options
- GFCI duplex receptacle options
Technical Description:
Unmetered Type; G90 Steel Material; Zinc Coated Finish; 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Line), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Aluminum, Line), 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Load), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Copper, Neutral-Large Hole), 10 to 8 AWG Solid, 10 to 1/0 AWG Stranded (Aluminum, Neutral-Large Hole), 14 to 8 AWG Solid, 14 to 4 AWG Stranded (Copper, Neutral-Small Hole), 12 to 8 AWG Solid, 12 to 4 AWG Stranded (Aluminum, Neutral-Small Hole), 12 to 8 AWG Solid, 12 to 2 AWG Stranded (Copper/Aluminum, Ground) Wire Size; UL, CUL Approval; NEMA 3R Enclosure; 100 Amp Current Rating; 1-Phase Circuit Configuration; No Illuminated; CB250 First Position Circuit Breaker Type; BR54U Left Position Receptacle Type; CB120 Third Position Circuit Breaker Type; CB130 Second Position Circuit Breaker Type; 5-20R2GFCI Right Position Receptacle Type; R32U Center Position Receptacle Type; Voltage Rating 120/240 Volt; Cabinet Dimension 9-3/4 Inch Width X 5-3/16 Inch Depth X 17-3/8 Inch Height; Mounting Type Surface;
Product Specifications
| |
---|---|
UPC: | 784567571820 |
Second Position Circuit Breaker Type: | CB130 |
Third Position Circuit Breaker Type: | CB120 |
Wire Size: | 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Line), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Aluminum, Line), 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Load), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Copper, Neutral-Large Hole), 10 to 8 |
Illuminated: | No |
Material | G90 Steel |
Finish: | Zinc Coated |
Enclosure: | NEMA 3R |
Approval: | UL, CUL |
Additional Information: | Voltage Rating 120/240 Volt; Cabinet Dimension 9-3/4 Inch Width x 5-3/16 Inch Depth x 17-3/8 Inch Height; Mounting Type Surface; Applicable Standard NEMA, NEC |
Type: | Unmetered |
| |
---|---|
Current Rating: | 100 Amp |
Circuit Configuration: | 1-Phase |
Left Position Receptacle Type: | BR54U |
Center Position Receptacle Type: | R32U |
Right Position Receptacle Type: | No |
Right Position Receptacle Type: | G90 Steel |
Category: | Zinc Coated |
Manufacturer: | Midwest Electric Products, Inc. |
Manufacturer Part Number: | U075CTL010 |
Product Description: | UL, CUL |
Cross Reference: | GE1LU532SS, CESMPSC75GRHR, TL137US |
| |
---|---|
UPC: | 784567571820 |
Second Position Circuit Breaker Type: | CB130 |
Third Position Circuit Breaker Type: | CB120 |
Wire Size: | 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Line), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Aluminum, Line), 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Load), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Copper, Neutral-Large Hole), 10 to 8 |
Illuminated: | No |
Material | G90 Steel |
Finish: | Zinc Coated |
Enclosure: | NEMA 3R |
Approval: | UL, CUL |
Additional Information: | Voltage Rating 120/240 Volt; Cabinet Dimension 9-3/4 Inch Width x 5-3/16 Inch Depth x 17-3/8 Inch Height; Mounting Type Surface; Applicable Standard NEMA, NEC |
Type: | Unmetered |
| |
---|---|
Current Rating: | 100 Amp |
Circuit Configuration: | 1-Phase |
Left Position Receptacle Type: | BR54U |
Center Position Receptacle Type: | R32U |
Right Position Receptacle Type: | No |
Right Position Receptacle Type: | G90 Steel |
Category: | Zinc Coated |
Manufacturer: | Midwest Electric Products, Inc. |
Manufacturer Part Number: | U075CTL010 |
Product Description: | UL, CUL |
Cross Reference: | GE1LU532SS, CESMPSC75GRHR, TL137US |
Mickey mcmorris –
Paid a small fortune for two of these and they rusted within six months. Not good in a saltwater environment
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
ryan k mckibbon –
Same issues with closing cover while cord in use as other users reported, even on the 20A. Also, had to change out the 20A GFCI receptacle to a WR/TR rated receptacle to meet current (2014 NEC) code for residential installation. For the price, I was expecting it to meet current codes.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mercy2915 –
The box provided exactly what I needed for the project but overall quality of the product was poor. Paint was chipped in several places (already rusting) and both the 120v breaker and the GFCI were bad. Had to go to Home Depot and replace both. three of the conduit punch outs were not even close to being scored, so I had to drill them out.Also, some of the lugs were over-torqued and some were completely loose. Seems like these things are slapped together by people who don’t care.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Frank –
The 50 amp breaker looks defective with a split in the middle of it. you can see inside the breaker.I hooked it up but replaced the breaker with a new one I had.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal